Logiciel libre de géométrie, d'analyse et de simulation multiplateforme par Yves Biton

# Recurrent complex sequence with MathGraph32 : Babylon sequence.

publication samedi 14 décembre 2013.

While testing MathGraph32 I happened to see properties I didn’t know.

One of these properties is about a complex recurrent sequence.

A well known property states that, if p is a real positive number, the real recurrent sequence défined by it’s first term $u_0$ and the formula $u_{n+1}=\frac{1}{2}\left( u_n+\frac{p}{u_n} \right)$ converges towards $\sqrt{p}$ (this result is known since the Antiquity under the name of Babylon algorithm or Heron method).

We will first study the complex recurrent sequence $(z_n)$ with first term $z_0$ (complex) and defined through the recurrent formula $z_{n+1}=\frac{1}{2}\left( z_n+\frac{2i}{z_n} \right)$, then we will generalize this study.

MathGraph32 will help us visualize such a sequence and emit hypotheses. At the end of this article, I’ll propose demonstrations of these results.

### Creation of two figures illustrating this situation with MathGraph32.

Get MathGraph32 started.

In the Options - Preferences menu item, Level tab, check that the selected level is advanced with complex numbers calculation.

Use icon to create a new figure with an orthonormal frame. For the type of grid, select the checkbox With dots. Check Frame with vectors and enter u and v as names for the vectors of the axis. Validate.

With icon , create a free point. Use icon to get this point named $M_0$.

We will now measure the affix of this point in our frame. For this, use icon .

Click on the point $M_0$. A message confirms the creation of this affix.

For more convenience, we will define a complex calculation named z0 which will contain the affix we just got measured.

For this, use menu item Calculation - New complex calculation - Complex calculation (keyboard shortcut : Ctrl + Shift+ E).

A dialog box pops up. In the field name of the calculation, enter z0. Use button Values to enter in the formula field Aff(M0,O,I,J). So z0 will state for the affix we just measured. Validate by OK.

We will now define the complex recurrent sequence $\left( z_n \right)$ with first term $z_0$ and defined by the recurrent formula $z_{n+1}=\frac{1}{2}\left( z_n+\frac{2i}{z_n} \right)$.

Before this we must create a complex function f of a complex variable defined by $f(t)=\frac{1}{2}\left(t+\frac{2i}{t}\right)$.

We use menu item Calculation - New complex calculation >> Complex function (keyboard shortcut : Ctrl + G).

A dialog box pops up. Enter f in the field Name of the function and t in the field formal variable. In the field formula, enter 1/2*(t+2*i/t). Validate by OK.

Let us now define the complex recurrent sequence.

For this, use menu item Calculation >> New complex calculation >> Complex u(n+1) = f[u(n)] sequence. A dialog box is opening. Fill it like this :

We now have to create the graph of this complex recurrent sequence. Each term of this sequence will be visualized by a point mark and these marks will be joined by segments.

In the color palette, set the blue color activated, the get the thin dotted line style activated in the line style palette.

In the style point palette, get the little circle activated (or the point style of your choice).

Use menu item Create >> Recurrent sequence graph - Complex. The graph appears.

Use icon to capture point $M_0$.

You get the figure below animated by the JavaScript library of MathGraph32 (You ca capture point $M_0$).

on the figure above, the sequence seems to converge towards 1 + i. For other positions of $M_0$, the sequence seems to converge towards – 1 – i.

It is not a surpise if we remember that 1 + i et – 1 – i are the two complex numbers with a square equal to 2i ?

When point $M_0$ is getting near the line of equation y = – x, a special behavior seems to happen. Let us study this with MathGraph32.

In the color palette, activate the black color.

Let us first create the line of equation y = – x (we will call it D). For this use icon (creation of a line by point and line slope).

Then click on point O.

In the dialog box popping up, enter – 1 in the field Slope. Validate by OK. The line appears.

Capturing point $M_0$, we see that, when $M_0$ is not on line D, all the graph points stay in the same half-plan of border D as point $M_0$.

Let us look now what happens when $M_0$ lies on line D.

For this, use menu item Modify - Link creation - between point and objet. Click on point $M_0$, then on line D. The point $M_0$ has become a point linked to line D.

Here is the figure we get (You can capture point $M_0$) :

Capture point $M_0$ with icon . It seems that all points with $z_n$ affix stay on line D et also that the behavior of the sequence is « chaotic ».

### Demonstration of the results observed above.

We will assume that :

A complex sequence $\left( z_n \right)$ converges towards a complex $\ell$ when $\lim_{n \to {+\infty }} \left| z_n - \ell \right| = 0$.

The usuals theorems on converging reals sequences can be generalized to complex sequences.

Let us write a = 1+ i et b = -a = -1 - i. We will call A et B points of affixes a et b = – a.

For each positive integer n, we have : $z_{n+1}-a = \frac{1}{2}\left( z_n + \frac{a^2 }{z_n } \right)-a=\frac{1 }{2 }\left( \frac{{z_n}^2+a^2-2az_n }{ z_n} \right)=\frac{1 }{2z_n }\left( z_n-a \right)^2$.

In the same way we get $z_{n+1}-b ==\frac{1 }{2z_n }\left( z_n-b \right)^2$.

So we have now $\frac{z_{n+1}-a }{z_{n+1} + a } = \left( \frac{z_n-a }{z_n+a } \right)^2$.

We can demonstrate by recurrence that, for each n, $\left( \frac{z_n-a }{z_n+a } \right)=\left( \frac{z_0-a }{z_0+a } \right)^{2^n}$. We deduct from that : $\left| \frac{z_n-a }{z_n+a } \right|=\left| \frac{z_0-a }{z_0+a } \right|^{2^n}$.

Let us assume point $M_0$ is in the half-plan with border D containing A. So we have $M_0$ nearer from A than from B and so$\left| z_0-a \right| < \left| z_0-b \right|$ and we have $\left| \frac{z_0-a }{z_0+a } \right| < 1$. Then we deduct $\lim_{n \to {+\infty }}\left| \frac{z_n-a }{z_n+a } \right| = 0$ and we get that the complex sequence $\left( \frac{z_n-a }{z_n+a } \right)$ converges towards 0.

Yet we have $\frac{z_n-a }{z_n+a }=\frac{z_n+a-2a }{z+a }=1-\frac{2a }{z_n+a }$ so we get $z_n+a=\frac{2a }{1-\frac{z_n-a }{z_n+a } }$. Applying theorems on limits, we get that $(z_n + a)$ converges towards $2a$ and so $(z_n)$ converges towards a.

The exponent $2^n$ explains the extreme speed of the sequence convergence towards a = 1 + i.

In the same way we can demonstrate that, when$M_0$ is in the other half-plan with border D, the sequence converges towards b = – a.

Let us now focus on what happens when point $M_0$ lies on line D.

Let us call$M_n$ point with affix $z_n$.

We will first demonstrate that, when point $M_n$ A lies on line D, point $M_{n+1}$ is also on line D.

If $M_n$ lies on line D, $zn$ is of type $z_n = xia$ with x real(Indeed vector of affix i.a is orthogonal to vector $\overrightarrow{OA}$ of affix a).

Now we get $z_{n+1}=\frac{1 }{2 }\left( xia+\frac{a^2 }{xia } \right)=\frac{1 }{2 }\left( xia-i\frac{a }{x } \right)=\frac{1 }{2 }\left( x-\frac{1 }{x } \right)\times ia$, and it proves that $M_{n+1}$ lies also on line D.

By recurrence we deduct that all points $M_n$ are on line D.

Let us now state $z_n = x_n ia$. We get, for each n, $x_{n+1}=\frac{1 }{2 }\left( x_n - \frac{1 }{x_n } \right)$.

MathGraph32 will now help us explain the chaotic behavior of the sequence $M_n$ when $M_0$ is on line D.

Start a new figure with MathGraph32 by clicking on icon and ask for an orthonormal frame dotted without vectors.

Use icon to create a function f of a real variable defined by $f(t) = \frac{1}{2} \left( t - \frac{1}{t} \right)$. Fill the dialog box as below. Let the checkbox Draw curve checked and validate.

Let us now create the line of equation y = x with icon (keyboard shortcut Ctrl + Q). Enter y=x in the field Equation and validate by OK.

In the color palette, get the red color activated.

Use icon of linked point creation to get a point linked to the x-axis of the frame. Use icon to name this point x0.

Click on icon . This icon purpose is to measure the abscissa of a point realtive to a frame. Click on point x0. A message confirms the creation of this measure represented by Coord(x0,O,I,J).

Let us now create the real recurrent sequence via menu item Calculation - Nouveau real calculation - u(n+1)=f[u(n)] real sequence.

Enter u for the name of the sequence. Use Values button to enter xCoord(x0,O,I,J) in the field First term. Enter 50 in the field Number of terms then validate by OK. Seee the dialog box below.

Now we have to create the graph of this sequence.

In the line style palette, get the thin dotted line stule activated .

Use menu item Create - Recurrent sequence graph - Real. A dialog box pops up. Let the checkbox Lines joining abscissa checked and validate by OK.

You can now capture point x0 with icon to visualize the chaotic behavior of this sequence whatever is the value of the first term.

Here is the figure we get (You can capture point x0) :

Let us explain this chaotic behavior :

This sequence cannot converge towards a real L for, otherwise, f being continuous, L would compute $f(L)=L\Leftrightarrow L-\frac{1 }{L }=L\Leftrightarrow -\frac{1 }{L }=0$ which is not possible.

It is obvious that, for x > 0, we have f(x) < x and, for x < 0, we have f(x)>x. We deduct that if, for instance, the first term of the sequence is positive, the sequence will start to decrease with positive terms. But, since the sequence is not allowed to be convergent, it cannot be minimized (theorem of the monotonous convergence). So, from an index, a term of the sequence will be negative. The, from this term, the sequence will increase with negative terms. But since this sequence is not convergent, it is not maximized and, from some index, a term will be positive and so on.

We can also point out the fact that, for some values of the first term $x_0$ , the sequence may not be defined, for instance when $x_0 = 0$, or when $x_0=-1$.

### Generalization of the result.

The preceeding results can easily be generalized with the sequence defined by $z_{n+1}=\frac{1 }{2 }\left( z_n+\frac{a^2 }{z_n } \right)$ where a stands for a non null complex number. Indeed our preceeding calculations did not use a particuliar value of a.

Naming A and B the point of affixes a and – a, D the perpendicular bisector of segment [AB] (D has a directing vector of affix ia), it is easy to show that the preceeding results are still valid.

If the sequence is defined :

If $M_0$ is in the half-plan of border D containing A, the sequence converges towards a.

If $M_0$ is in the half-plan of border D containing B, the sequence converges towards -a.

If $M_0$ is on line D the all the points $M_n$ of $z_n$ affix are on this line with a chaotic behavior.

Let us illustrate this general result with a new MathGraph32 figure. The figure will be at the beginning the same as our first figure.

Start a new figure with icon to get an ortho ormal frame dotted with vectors named u and v.

In the color palette. get the red color activated

With icon , create a free point. Use icon to get this point named $M_0$.

We will no measure the affix of this point in our frame. For this, use icon . Click on point $M_0$. A message confirms the creation of this affix.

For more convenience, we will create a complex calculation named z0 which will contain the affix we just got measured.

For this use menu item Calculation - New complex calculation - Complex calculation (keyboard shortcut : Ctrl + Maj + E).

A dialog box pops up. In the field Calculation name, enter z0. Use the Values button to enter Aff(M0,O,I,J) in the field Formula . Validate by OK.

In the color palette get the black activated.

With icon , create another free point. Use icon to name this point A.

Use icon to create the image of point A through the central symmetry of center O (Click first on point O, the on A). Name this point B.

Use icon to create segment [AB] then icon to create the perpendicular bisector of segment [AB].

Now measure the affix of point A (icon and click on A).

We will now create a complex calculation named a which will contain the affix we just got measured.

For this use menu item Calculation - New complex calculation - Complex calculation (keyboard shortcut : Ctrl + Maj + E).

A dialog box pops up. In the field Calculation name, enter a. Use button Values to enter in the Formula field Aff(A,O,I,J). Validate by OK.

We must create a complex function f of a complex variable defined by $f(t)=\frac{1}{2}\left( t+\frac{a^2}{t} \right)$.

Let us use menu item Calculation - New complex calcualtion - Complex function.

A dialog box pops up. Enter f in the field Function name and t din the field Formal variable. In the field Formula, enter 1/2*(t+a^2/t). validate by OK.

Now we have to create the recurrent sequence.

Use menu item Calculation - New complex calculation - u(n+1) = f[u(n)] complex sequence. A dialog box pops up. Fill it as below.

In the field Name of the sequnece, enter z. In the complex functions list, function f is already selected. Use button Values to enter z0 in the field First term. Entrez 50 in the field Number of terms and validate by OK.

We now have to create the graph of this complex sequence.

In the color palette, get the blue activated and activate the thin dotted line style in the line style palette.

Now use menu item Create >> Recurrent sequence graph - Complex and ask for the graph of sequence z. The graph appears.

You can now capture point A and point $M_0$ and notice that the preceeding result is universal.

Here is the figure we get (You ca capture point A and point $M_0$) :

Let us now look at what happens when point $M_0$ lies on the perpendicular bisector of segment [AB].

Use icon to create the perpendicular bisector of segment [AB].

Now link the point $M_0$ to this perpendicular bisector (menu item Modify - Link creation - Between point and object then click on the perpendicular bisector).

You see taht all the points of the graph stay on then line (it may happen that some points drift apart from the line : it is due to the accumulation of rounding numbers errors computing the complex calculations).

Here is the figure we get (You can capture point A and point $M_0$.) :

### Conclusion

We have seen in that article that MathGraph32 is a very useful tool to get sophisticated figures in a few mouse clicks. Then we have the pleasure to demonstrate the results we observed.

Yves Biton (MathGraph32 author)